Lesson 2
Practical part
Step 1. Last week you made a part of the oil pump.
Step 2. Next, prepare the details:
1- make on the edge of a wide stick
2- divide 2.5 cm thin sticks and make a hole at the end
Step 3. Then prepare the battery box, batteries, wires, switch. Try to connect with the motor. As shown in the picture
Step 4. Make the base for the oil pump out of cardboard.
Size, length – 25 cm
width – 10 cm
height 12 cm
And leave the side open
Step 5. Make two cuts on the surface of the cardboard
